Select File В» Setup В» Import/Export from the main menu to open the CAM Editor Import/Export page of the Preferences dialog. Select View В» NC Editor to access the Rout menu options.ДЇor more information about exporting to Altium Designer, see the Reverse Engineering PCBs page. If you want to modify the Mill Rout layer, you must be in the NC Editor mode. The data will be imported on a separate layer whose layer name is based on the filename, for example, 'cam.rte'. The Import Mill/Rout Data dialog will display after the Mill/Rout files are imported. Importing Mill Rout FilesД¬reate a new CAM file by selecting File В» New В» CAM Document from the main menu, then select File В» Import В» Mill/Rout to open the File Import - Mill/Rout dialog.

lib) by selecting File В» Import В» Custom Aperture Library File (. If there are no embedded apertures included in the files you want to import, you may load an Aperture file using pre-determined template formats by selecting File В» Import В» Aperture File, or load a Custom Aperture Library file (. You can use the File В» Import menu options to import the following file types individually or as a selection: Gerber ODB++ Netlist Drill Mill/RoutВ and DXF/DWG. Once the defaults are accepted, the NC drill data will be imported on a separate layer whose layer name is based on the file name, for example,В _4_port_serial_interface.txt_. The Import Drill Data dialog will display after the NC Drill files have been imported. The file extension for NC Drill data created in the Altium Designer PCB Editor is. To import NC drill information related to your design, select File В» Import В» Drill from the main menu to open the File Import NC Drill dialog. The Steps tab in the CAM panel will be refreshed, where you may add or modify steps by right-clicking and selecting the appropriate command from the pop-up menu. Once all default values for step assignment and the design are imported, a log file will be produced. Steps are identified by Step Name and the O bject Count associated with that step. This dialog displays all of the ODB++ steps that have been defined in the loaded ODB++ database for the current document. Once the files have been imported, the Steps Table dialog will open. Next, select File В» Import В» Quick Load to open the File Import - Quick Load dialog. To do so, select File В» New В» CAM Document from the main menu. Other CAD/CAM packages should already have the drill hole data present in the ODB++ structure, therefore a separate import of the NC drill data is unnecessary. If the NC drill data has been generated from the PCB Editor, you must separately import the NC drill data after the ODB++ import has been completed.

The ODB++ import option imports ODB++ files into the CAM Editor. Once completed, NC files will be imported into the CAM Editor and display in the design window along with a Quick Load Process Report log file. When the Gerber files have finished importing, the Import Drill Data dialog will open. From this dialog, you may specify the aperture format from the Detect Aperture Formats drop-down list and access the Gerber Options or Default Units buttons to display the setup dialogs. To import the Gerber, NC Drill, and netlist files into the new CAM document ( File В» New В» CAM Document), select File В» Import В» Quick Load from the main menu to open the File Import - Quick Load dialog. You may add any additional extensions required, separated by a semi-colon ( ) from the previous entry. The file extensions listed here determine the type of an imported file, for example,В a quick load of Gerber files will look for and load all files with an *.A, *. To check the file extensions or add a new extension, click on the CAM Editor - Miscellaneous page of the Preferences dialog. Using the existing layers may be useful when loading data for more than one board in the same files using different steps in order to panelize the loaded PCBs onto the same CAM panel, which is known as multi-step panelization. You may specify if you would like the CAM Editor to create new layers, even if layers with identical layer types already exist, or to use the existing layers.

To do so, select File В» Setup В» Import/Export from the main menu to open the CAM Editor - Import/Export page of the Preferences dialog.Д¬lick on Import Settings from the Gerber Import (Default) area to display the Gerber Import Settings dialog, where you may set up the default import settings for Gerber files. Setting Up Import OptionsД«efore importing the Gerber, NC drill, and netlist files into the new CAM document, you may set up import options, such as the Gerber Import settings. The File В» Import menu includes separate commands that allow the import of selected Gerber, ODB++, netlist (IPC-356-D), NC Drill, Mill/Rout, and DXF/DWG files.

Digital clock gerber file cam350